PDA

View Full Version : Drive Shaft


JMUTaco
11-16-2005, 02:58 AM
I have an O1 X-cab and am don't know a whole lot about the mechanics but my driveshaft has a wet look around the knuckles (is that the right word?). Just wondering if that was normal or if I need to do some maintanence on it. I have never noticed any fresh fluid coming out from there though. Thanks for any help.

BeaterToyota
11-16-2005, 05:30 AM
Are you talking about the universal joints at each end of the shaft? That would be grease coming out of the u-jounts that you're seeing. A little bit isn't necessarily bad. There is a fitting in each joint where you can add grease with a greas gun, and maybe yours needs some. It's something to check whenever you do oil changes, or if you spend a lot of time driving trhough streams.

Bsmi16490
11-16-2005, 06:23 AM
My 01 is like that too, greased lightning the spot and watch it, I did that and it took 6 months to return, just make sure you dont have a bad joint and keep grease in it

JMUTaco
11-17-2005, 11:48 PM
It is just a little bit. I will keep an eye on it. Thanks for the help guys.