Video of RI wheeling

[TiTRD]

Nothing fancy, just figured I'd share. This is from a trail day at a horse ranch in Rhode Island.

http://video.google.com/videoplay?docid=-653326799155125693&q=riohva&total=6&start=0&num=10&so=0&type=search&plindex=5

[Eric_N]

I sawthe beginning that vid somewhere else with a little different music. It was hilarious.

[TiTRD]

This one? Yeah thats me driving like an idiot :p

http://www.youtube.com/watch?v=NCuEQPYlas8

[Eric_N]

Yup, thats it. Truck looks good, I saw some pics of it before you got rid of the bed and everything, ands it pretty clean underneath.

[TiTRD]

Yup, thats it. Truck looks good, I saw some pics of it before you got rid of the bed and everything, ands it pretty clean underneath.

Thanks. It's a Maryland truck that lived it's life as a landscape truck in a business park in Gaithersburg. Didn't see too much driving in the winter. It has 87k original miles on it. I blew my second R&P in it a few weeks ago, so it's getting put away for the winter.

[NTC_Lee]

:flipoff:

those are my vids

[TiTRD]

:flipoff:

those are my vids

You and your "junior member" need to head back to the Alpaca farm and make me a sweater.

[amgraham]

Those CJs sure like the skinny pedal, eh?

[TiTRD]

Those CJs sure like the skinny pedal, eh?

Yeah. That black one is running a 383 stroker putting out about 400 hp. But it's carbed as you could see. The other is running 4.3 Chevy.

That place was super slick and throttle was sort of needed.

[NTC_Lee]

You and your "junior member" need to head back to the Alpaca farm and make me a sweater.
go tell people about your "old neighborhood" some more faggot :flipoff1::flipoff:

[94krawler]

What the truck was tired and needed to laydown:wtf:

2nd R+P times for tons man:flipoff:

[TiTRD]

2nd R+P times for tons man:flipoff:

I'd like to. Hopefully I'll win the lottery:D

[Littletoy]

Nice vid. Looked like fun.

[94krawler]

I'd like to. Hopefully I'll win the lottery:D


I have less in mine than my toy axle's and they haven't broken yet. I actually built mine for what I sold my toy axles for.

[TiTRD]

I have less in mine than my toy axle's and they haven't broken yet. I actually built mine for what I sold my toy axles for.

Really....

What are specs on yours? What were the specs on your toys?

[94krawler]

Really....

What are specs on yours? What were the specs on your toys?

Toy setup

front axle

ARP studs in hubs and knuckles
Marlin arms and linkage
PSC ram limited for toy use and lines
30spline's
cyro'ed hub gears
cyroed 4.88's
aussie locker
housing was trussed and knuckle balls gusseted and steering stops boxed
Sky wide kit, LC rotors, big IFS calipers

Rear axle

v6 4.88 chunk with a spool

My 60(dodge DRW narrowed 3.5 on long side)

1 rockstomper arm tapered for toy TRE
yukon inners 1 custom(narrowed long side so fits stock toy hanger)
driveflanges
5.38's and a lockright
35spline spicer outers and stock joints
HAD 60/toy flange
1.4 dom linkage with dodge 1 ton ends
PSC ram
GM SRW hubs and rotors

14b(SRW FF)

DRW hubs to narrow it to 63.5
BTW disk brackets and monte calipers
5.38's and a spool.


I was breaking a set of 30splines a year. 1st set broke the R+P and destroyed the housing. I was also breaking knuckels often. Bill found a problem after he got my toy axles. The center pin was breaking and the carrier was deformed and the side gears on the locker were waved over.

So far since the tons went in I broke 1 4 year old u-joint in my front shaft. Oh and I run 39.5Irok's with a much heavier rig now.The 2 biggest advanges are it dont break as often and it turns MUCH better even with the longer WB I have now.

I did get both my tons for 250bucks though. Actually 14b was free and front 60 was 250. Keep your eyes open they are out there cheap.