Lafawnduh

[Munky]

So I figured that I would just start a build thread over here cuz im sure not everyone has seen what I have yet. 1986 Toyota Xcab Pickup “Lafawnduh".

here she is when i first got her
http://i3.photobucket.com/albums/y54/munkyboyiskool/86yota1.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/86yota2.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/86yota8.jpg
I know she has a few rust spots but I really don’t mind she is just a trial rig


took off the pole holder, and camper shell, and busted a window shortly after i got her
http://i3.photobucket.com/albums/y54/munkyboyiskool/100_0334.jpg
Removed the sway bar
http://i3.photobucket.com/albums/y54/munkyboyiskool/100_0328.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/100_0329.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/100_0330.jpg


removed the broken power radio antenna, replaced the broken window.
http://i3.photobucket.com/albums/y54/munkyboyiskool/100_0344.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/100_0345.jpg
and today i installed the CB antenna
http://i3.photobucket.com/albums/y54/munkyboyiskool/100_0346.jpg
and CB Radio
http://i3.photobucket.com/albums/y54/munkyboyiskool/100_0347.jpg
shortly after that i moved the CB antenna to where its currently located

[Munky]

so i drove down to Brent's and then we went over to his place of biz, to use the lift. cuz we thought it was going to rain come to find out it didnt rain all day till like 4 or something.
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-38.jpg
Tyras while in the bed of her
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-39.jpg
Tyras removed
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-41.jpg
Brent under removiing the Tyra Holder
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-40.jpg
Tyra Holder removed
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-42.jpg


Shackle Replacement from
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-44.jpg
To
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-45.jpg
Brent Removing the Front Bumpstops
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-46.jpg
Cut Down Bumpstops
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-50.jpg
Inside of the Front Fender before beating the hell outta it
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-51.jpg
After
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-60.jpg
Put the Tyra's back on
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-53.jpg
Sitting outside the Garage
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-54.jpg

So there is a small hill right outside the Garage get alittle Flex Test outta her

http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-55.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-56.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-58.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-59.jpg

[Munky]

hit the beach for abit. Seems that i didnt have enough wheel speed on our first try to get on the beach and we go stuck had to get a guy to pull us out. Then we Aired down some and tried again. That attempt worked.

http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-61.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/LaFawnDuh-63.jpg

ended up going wheeling, lost the foil shortly after this pic

http://i3.photobucket.com/albums/y54/munkyboyiskool/Tinsley/TinsleyMarch09-01.jpg

i ordered a SmittyBuilt XRC8, i went ahead and took it out the box and put it together as much as i could. should be getting a bumper made soon

http://i3.photobucket.com/albums/y54/munkyboyiskool/S5031362.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/S5031363.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/S5031364.jpg

[Munky]

I wanted to go ahead and move my turn signals so i did that.
before
http://i3.photobucket.com/albums/y54/munkyboyiskool/turn%20signals/S5031536.jpg
grill off yes im using the Taco as a work bench
http://i3.photobucket.com/albums/y54/munkyboyiskool/turn%20signals/S5031538.jpg
turn signals hanging out
http://i3.photobucket.com/albums/y54/munkyboyiskool/turn%20signals/S5031539.jpg
turn signals in the grill
http://i3.photobucket.com/albums/y54/munkyboyiskool/turn%20signals/S5031540.jpg
do yall think this angle will be ok?
http://i3.photobucket.com/albums/y54/munkyboyiskool/turn%20signals/S5031541.jpg
put back together
http://i3.photobucket.com/albums/y54/munkyboyiskool/turn%20signals/S5031543.jpg

i put them at an angle to keep them from touching the radiator.

after i did that move i decided to go ahead and pull the bumper off.

http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/S5031545.jpg

so the turn signals looked dumb at an angle i flush mounted the turn signals.
http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/Photo0288.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/Photo0289.jpg
and the Trail Gear Order that i placed with a buddy showed up today bumper and sliders in the box
http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/B.jpg
and the other day both my truck next to each other in the yard
http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/Photo0287.jpg

[1stgenrnrdude]

looks good man i like!

[jjrgr21]

you're gettin after it

[BeaterToyota]

http://i3.photobucket.com/albums/y54/munkyboyiskool/turn%20signals/S5031540.jpg
do yall think this angle will be ok?
http://i3.photobucket.com/albums/y54/munkyboyiskool/turn%20signals/S5031541.jpg
put back together
http://i3.photobucket.com/albums/y54/munkyboyiskool/turn%20signals/S5031543.jpg

i put them at an angle to keep them from touching the radiator.

after i did that move i decided to go ahead and pull the bumper off.

http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/S5031545.jpg

so the turn signals looked dumb at an angle i flush mounted the turn signals.
http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/Photo0288.jpg

When I did mine, I think I swapped the left to the right and the right to the left so that they fit around the radiator, etc. It was several years ago; I don't totally remember.

[Eric_N]

Its not the radiator they hit, its the A/C condenser. From what I remember flipping them just makes them fit better in the grill.

[BeaterToyota]

Its not the radiator they hit, its the A/C condenser. From what I remember flipping them just makes them fit better in the grill.
Maybe the oil cooler? My shit don't have no A/C. Either way, I think I swapped mine.

[Munky]

thanx for the info guys

[Munky]

just got back to the inlaws from brent's, the bumper is installed, just need to more bolts put in. Should be doing the Winch soon.
Seems that my CB cable is not long enough and my FWD/REV power is not good.

here is the bumper

http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/Photo0291.jpg

[Munky]

went to Walmart and got some Primer and Paint yesterday, walked outside this morning and the bumper was rusty.

Removed & Cleaned it up abit
http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/S5031538.jpg
Sprayed some Grey Primer
http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/S5031539.jpg
Then painted it Flat Black
http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/S5031541.jpg
Reinstalled
http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/S5031543.jpg
a shot from the driver seat
http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/S5031544-1.jpg

Then on to the winch install had to put it in and remove it because of the box placement ended up moving it over the spool, i didnt feel like moving the turn signals again. Also i know its to the drivers side abit and prob should center it in the whole that i cut but i like it there for now maybe later ill move it. Also seems that TG was not kidding when they said the Roller Fairlead does not work with the product. So if anyone has an hawse Fairlead they would like to either trade me or sell me please let me know. or would going that route not be good with the cable?

Pic
http://i3.photobucket.com/albums/y54/munkyboyiskool/bumper/S5031550.jpg

[BeaterToyota]

Lookin' good.

[locknload]

Yep, looks good. Now fix that leak. I saw it in a different pic as well, looks like a gusher. Have you located it yet? Hopefully it's the front main seal, easy fix.

[Munky]

havent actually looked into it yet but alot of other people said main seal also

[locknload]

If that's where the leak is coming from, go to PepBoys and order the timing chain gasket set from FelPro for $20. It should come with the seal, oil pump o-ring, and SpeedySleeve (use it).

[Munky]

Gasket kit picked up, hawse fairlead picked up. updates to follow

[Munky]

well just went and picked up these 33x12.50x15 MTs they arent the best looking but they are better than the ATs that are on her now. once i get them separated and installed. The Rims will be for sale came off a Bronco so i believe they are 5 on 5.5, they are black on the ouside not painted on the inside steelies

http://i3.photobucket.com/albums/y54/munkyboyiskool/33mts.jpg

[Munky]

So thanks to Kack for the work that was done the slider install is done i just have to paint it up.

http://i3.photobucket.com/albums/y54/munkyboyiskool/sliders/100_0712.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/sliders/100_0714.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/sliders/100_0715.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/sliders/100_0717.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/sliders/100_0718.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/sliders/100_0719.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/sliders/100_0720.jpg

[jjrgr21]

looking good

[PrezidentRedz]

Sweeet

[Munky]

so i went wheelin this weekend at a private farm. ended up burning up my clutch, tabletop, is what i got hung up on. got a couple of pics.
http://i3.photobucket.com/albums/y54/munkyboyiskool/Tinsley%20Sept/DSCF9116.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/Tinsley%20Sept/TinsleySept09-01.jpg
i have video of it also, ill post that once i get it uploaded.

[1stgenrnrdude]

nice man!

[Munky]

i give you video

http://www.youtube.com/watch?v=Eet0E6W_1o8

[99SR5]

i like the truck

[Munky]

wow i havent updated this thread in some time.

got the clutch replaced that took a couple of days to do cuz it was the first time that the guys that i had help me and i had done it.

went to Crozet back in March. (pics)
http://i3.photobucket.com/albums/y54/munkyboyiskool/Crozet/0313001020.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/Crozet/0313001502.jpg
http://i72.photobucket.com/albums/i187/97vapathy/crozet3-13-10/DSCF9620.jpg
got hung up good
http://i72.photobucket.com/albums/i187/97vapathy/crozet3-13-10/DSCF9647.jpg
ended up getting a flat, got tired of the shitty tires i had so i ordered some 34x10.50x15 LTBs, wife got me a new hi-lift
http://i3.photobucket.com/albums/y54/munkyboyiskool/0507001417a.jpg
http://i3.photobucket.com/albums/y54/munkyboyiskool/0507001430.jpg
@ crozet i smashed my winch controller so i got a buddy to make me an incab switch get to that in a minute

i ordered some 4.7 transfercase gears and had them on hand for a couple or months finally got them in and twin sticks
http://i3.photobucket.com/albums/y54/munkyboyiskool/P5160113.jpg
2 vids
http://www.youtube.com/watch?v=LWLYkjNvnj0
http://www.youtube.com/watch?v=n4x-GlfLan0

thats about it, Crozet at the end of the month here i come

[1stgenrnrdude]

new tires look good! ALOT better than those old ones lol that thing is gonna be sick on the trails with that doubler setup. i need to get down to crozet soon... i might try for that memorial day thing :D

[Munky]

new tires look good! ALOT better than those old ones lol that thing is gonna be sick on the trails with that doubler setup. i need to get down to crozet soon... i might try for that memorial day thing :D

yeah man bring it

[onegreentj]

new tires look good! ALOT better than those old ones lol that thing is gonna be sick on the trails with that doubler setup. i need to get down to crozet soon... i might try for that memorial day thing :D

nut kick
NO BALLS!

[1stgenrnrdude]

nut kick
NO BALLS!

hey now hey now, work is crazy right now for me lol

[Munky]

1986 Toyota Extra Cab Pickup 4x4
4.10 gears front and rear with a welded rear
Transfer case 4.7-gear swap, have original gears in a box, twin shifter
Trail Gear Front Winch Bumper
Trail Gear Rock Sliders
T-bars turned up, 1" longer shackle in rear
34x10.50x15 LTBs on 15x7 wheels, maybe 400 miles on them, a little rock rash from 2 Rock Crawling trips
Have stock size tires to go with and 33x12.50x15 with maybe 15% tread, good for spares
Cobra Ultra CB, Firestick needs tuning
Comes with 63" Chevy springs to go with was going to do a SAS but haven't had time or money
Also extra IFS "3rd member"
New Battery
New flywheel
Needs timing chain and gasket set changed, but runs well. Comes with replacement parts
Would love to keep it but do not really have time to play with it.
Clean Title
Pics on request

looking to get $2000

[1stgenrnrdude]

good price, sucks youre selling it :/

[Munky]

yeah, going to mod the 07 since i paid it off

[Munky]

sold