Dopples Garage

[Eric_N]

Since I'm trying to save up some money to get my own place, I kinda got out of wheeling, but I cant get rid of the bug, so I've been doing work out of the garage. Some of you know I'm an ASE certified Tech and I've built enough of my own rigs to know a little something about Toyotas. Ive done gear sets, rebuilt axles, done engine swaps, and other various things for people on this board. Basically I'm just here to provide some services to people here and people you know. Here are some of the things I can do:

Rebuild front/rear axles, both IFS and Soild.
Install Lockers/Gears.
Install lift kits.
Rebuild Transmissions/T-Cases.
Replace Clutches.
Engine Swaps/Engine Rebuilds.
Welding/Fabrication.
Tune-up/regular maintenance.

Just PM me with what you want/need done, and I can give you a quote. I'm not a vendor for any products, but I can point you in the right direction, and help you get the right parts. I'm located in Sykesville, MD. 30 min west of Baltimore, an hour north of DC.

[kajo]

Best of luck Eric. :Pimp1:

[1stgenrnrdude]

X2 seems like a great guy, does great work he set up my lockers and gears in my truck and did a great job. very easy to work with, if i need any more big work done my truck that I'm not qualified to do i'd definitley bring it to him. good luck man.

[breaker]

How about swap wiring harness 3.0 to s/c 3.4

[Eric_N]

How about swap wiring harness 3.0 to s/c 3.4

PM me and we can talk. Do you have a harness from both engines that I can work with? Is the 3.4 already in the truck?

[larc68]

You work on Nissans too?

[Eric_N]

You work on Nissans too?

50% mark up.:flipoff:

What do you need?

[larc68]

50% markup...you must be giving me the discounted rate.

At this moment, nothing. Just keeping ya in mind if I do some work to it, lockers and such

[ccannon222]

Since I'm trying to save up some money to get my own place, I kinda got out of wheeling, but I cant get rid of the bug, so I've been doing work out of the garage. Some of you know I'm an ASE certified Tech and I've built enough of my own rigs to know a little something about Toyotas. Ive done gear sets, rebuilt axles, done engine swaps, and other various things for people on this board. Basically I'm just here to provide some services to people here and people you know. Here are some of the things I can do:

Rebuild front/rear axles, both IFS and Soild.
Install Lockers/Gears.
Install lift kits.
Rebuild Transmissions/T-Cases.
Replace Clutches.
Engine Swaps/Engine Rebuilds.
Welding/Fabrication.
Tune-up/regular maintenance.

Just PM me with what you want/need done, and I can give you a quote. I'm not a vendor for any products, but I can point you in the right direction, and help you get the right parts. I'm located in Sykesville, MD. 30 min west of Baltimore, an hour north of DC.

This is good to know. Next time I need gears setup I'll give you a call. My dad will need to have an ARB locker installed soon.

Chris

[94krawler]

Good luck Kid:Pimp1:

[dtrailtaco]

good luck man, keep you in mind if i need any stuff done

[breaker]

PM me and we can talk. Do you have a harness from both engines that I can work with? Is the 3.4 already in the truck?

yea both are still complete and in stock order 3.4 is still in donor 3.0 still in recipient may be getting a full size garage to work in also buying a house with it

[99SR5]

def gonna hit up eric when im doing my gears and lockers

[Eric_N]

yea both are still complete and in stock order 3.4 is still in donor 3.0 still in recipient may be getting a full size garage to work in also buying a house with it

Lemme know when your ready and we can figure something out.

[breaker]

Lemme know when your ready and we can figure something out.

Will be very soon just got to find out about my new house then when I get in it will be on

[Eric_N]

Anyone who wants gears set up, I'm getting a collection of diffs together, so I can do thirds/front diffs on an exchange basis. Less down time for you. I can also remove/install the diffs from your vehicle if needed, PM me for pricing/scheduling. I should have some 8" 4 cyl and V6 thirds soon, as well as 4 cyl and V6 IFS diffs from 86-95s. I should also have a complete 85 front axle assy. and an IFS width rear if you want one built.

Colin, your front diff will def. be done tomorrow evening. Finally got the shim situation figured out, and now I have a ton of shims for IFS front diffs to play with.

[Ted]

You work on Nissans too?

Do you?

[mtnyota]

Anyone who wants gears set up, I'm getting a collection of diffs together, so I can do thirds/front diffs on an exchange basis. Less down time for you. I can also remove/install the diffs from your vehicle if needed, PM me for pricing/scheduling. I should have some 8" 4 cyl and V6 thirds soon, as well as 4 cyl and V6 IFS diffs from 86-95s. I should also have a complete 85 front axle assy. and an IFS width rear if you want one built.

Colin, your front diff will def. be done tomorrow evening. Finally got the shim situation figured out, and now I have a ton of shims for IFS front diffs to play with.

Just make sure you don't get get rid of mine!:flipoff1:

[Eric_N]

Haha, get some damn parts together so I can get them built for you.

[1stgenrnrdude]

Colin, your front diff will def. be done tomorrow evening. Finally got the shim situation figured out, and now I have a ton of shims for IFS front diffs to play with.

Cool man! haha surplus is good. just let me know when, im off tomorrow (thurs) i can drive out and pick it up. gimme a call.

[Eric_N]

Bump.

Current Inventory:

High Pinion Non E-locker 4.10 third disassembled $75
V6 Third, open carrier, 4.10 with chipped teeth $25
4cyl Third, 4.10 open $25
Tacoma 8.4 Third, 4.10 open $50
2 85 rear housings empty $25 each
set of rear 85 axles/backing plates/drums $25 for everything
All the parts from an 85 front axle minus the housing $75
88 IFS front diff assy. $50
Couple square front driveshafts, I can get some lengths and better specs if interested

[Eric_N]

Added prices.

[KatzTRD]

PM Sent

[Eric_N]

Bump. Been on furlough for the last 6 weeks, I need some money. Anyone need any work done?

[Yotabuggy]

Hey Eric_N, do still have the hi pinion 3rd, the v6 carrier, and the 8.4 3rd? I'd buy them off you. Maybe the front axle parts too.

Also, I've doing some work for my friends for some time now and want to try to get a small business going. I can make drive shafts using new splined shafting with any amount of slip and 1/4" wall tube. Plus bend tube, machine work (lathe & mill), welding, fabricating, whatever you can think of. Go here www.scottscustomoffroad.com (http://www.scottscustomoffroad.com) to see some of my projects. I'm in Altoona, PA.

[94krawler]

Really?:thumbdown:

[hang10]

Hello, Are you still in the Sykesville area ? I am having some A.D.D. problems on my truck. Thanks ! Kurt

[Eric_N]

Yeah, whats the issue your having?

[hang10]

Yeah, whats the issue your having?
Hi Eric, It doesnt engage into 4wd and the indicator light doesnt come on either. Not really sure where to start trouble shooting it.....

[Eric_N]

Bump,
Have a shop to work out of on Weekends now in Baltimore.